A rf coaxial test probe is a spring contact probe designed with a coaxial structure matching the given impedance (such as 50Ohm, 75Ohm), is a soft connection to the test point or connector, carrying a signal from the connector to the network analyzer, then checking the performance of the product.
The RF coaxial test probe is composed of many parts and makes one side input structure with a ground shield and an inner probe pin, the ground shield is made of metal with gold plating to touch the connector ground or PCB ground pad, and the inner probe pin is just like a normal spring contact probe to mate the signal pin or tin solder on PCB board. Both generate a coaxial structure to get the signal passing over the probe and flowing through the whole probe to the opposite side, that is connector side which is usually designed into SMA or SMP (the required connector types.). It makes the automated test possible by mounting on a fixture driven by pneumatic controlling.
RF coaxial test probes can measure a wide range of RF components in electronic circuits.
Big RF component manufacturers like muRata, I-PEX, hirose, ECT and etc. will launch their own rf switches and connectors, we are offering innovative and high-quality rf coaxial test probes to measure different bandwidths while reducing the attenuation, meanwhile bringing the customers a good experience in test process by a long durability and stability.
RF Switches Size
1. 1st generation RF coaxial switch size 3.0*3.0*1.75mm, measurement size 2.1mm.
Murata RF coaxial switch part number: MM8430-2610
ECT RF coaxial switch part number: ECT818000251
TXGA rf coaxial switch part number: C90-101-0004
the rf coaxial test probe F314/ F360 can measure all.
2. 2nd generation RF coaxial switch size 2.5*2.5*1.4mm, measurement size 2.1mm.
Murata rf coaxial switch part number: MM8130-2600
ECT RF coaxial switch part number: ECT818000276/ ECT818000163
TXGA rf coaxial switch part number: C90P103-10004AH
The other 2nd generation RF coaxial switch size 2.7*2.7*1.6mm, measurement size 2.0mm
The RF coaxial test probe F360 can measure all.
3. 3rd generation RF coaxial switch size 2.0*2.0*0.9mm, measurement size 1.35mm.
Murata rf coaxial switch part number: MM8030-2600
ECT RF coaxial switch part number: 818000291
TXGA rf coaxial switch part number: C90P106-00004AH
the rf coaxial test probe F314/ F260 can measure.
4. 4th generation RF coaxial switch size 1.8*1.8*0.85mm, measurement size 1.2mm.
Hirose RF coaxial switch part number: MS-180
ECT RF coaxial switch part number: ECT818000586
TXGA rf coaxial switch part number: C90P105-00004AH
The RF coaxial test probe F180 can measure.
5. 5th generation RF coaxial switch size 1.6*1.6*0.7mm, measurement size 1.1mm.
The RF coaxial test probe F515 can measure.
RF Connectors Size
1st generation rf coaxial connector (USS Connector) size 3.0*3.0*1.25mm, measurement size 2.0mm.
IPEX rf coaxial connector part number: HMF1 20279-001/ HMF2 20314-001
ECT rf coaxial connector part number: 818000281/ 818000071
Hirose rf coaxial connector part number: U.FL-R-SMT-1
Speedtech rf coaxial connector part number: C88P132；
2nd generation RF coaxial connector size 3.0*3.0*1.15mm, measurement size 2.1mm.
3rd generation RF coaxial connector size 2.0*2.0*0.85mm, measurement size 1.4mm.
IPEX rf coaxial connector part number: HMF3 20369-001
ECT rf coaxial connector part number: 818000976/ 818000157
Speedtech rf coaxial connector part number: C89P104；
4th generation RF coaxial connector size 2.0*2.0*0.6mm, measurement size 1.5mm.
IPEX rf coaxial connector part number: HMF4 20449-001
ECT rf coaxial connector part number: 818000531/ 818000500
Murata rf coaxial connector part number: MM4829-2702
Hirose rf coaxial connector part number: W.FL-R-SMT-1
Speedtech rf coaxial connector part number: C87P101；
5th generation RF coaxial switch size 2.0*2.0*0.56mm, measurement size 1.4mm.
IPEX rf coaxial connector part number: HMF5 20566-001
Murata rf coaxial connector part number: MM5829-2700
Speedtech rf coaxial connector part number: C81P101；
